Semi automatic binding machine PE equipment standard
1. Save time, material and manpower.
2. It is easy to operate.
3. There is no need to adjust the packaging of different sizes.
4. Safe and easy operation.
Useful:
This bundle machine is suitable the packing goods category: Print/newspaper/magazine/cardboard/clothing/food/chemical/books/mail/lumber/paper finished product/or other.
This semi-automatic binding machine PE is applicable to packing items category: printed goods / newspapers / magazines / cardboard / clothing / food / chemicals / books / mail / Wood / paper products or other.
Reasons for equipment purchase
Local features
Structure and performance:
This machine is for binding material to round rope nodule, cut off and other processes are automatically completed.
1. There are four wheels that can move freely.
2. The binding methods include single, double, three, cross, etc. the mechanical models are jdb-600m, jdb-750m, jdb-1000m and jdb-1200m, but the most suitable type of machine can be selected according to the size of the binding material when you choose to use the machine.
3. The needle bearing is used to rotate the main shaft parts, which can make the mechanism rotate smoothly.
4. This machine makes pe-28 special packing rope, and adopts pulley scheme in rope road.
5. Tightening method: equipped with a binding device, it can freely adjust the binding degree of the binding material (a new practical case)
6. The adjustment of twist (c-46) can be adjusted simply without tools (new practical case).
7. Brake device: in order to make the rotation and stop of the conductor (cable) bar smoothly realized, a control brake device is provided, and the brake adjustment can be operated simply.
Performance:
1. Packaging time: about 1.5 seconds.
2. This machine uses special pe-28 packing rope with low cost.
3. Power supply: 220V (motor horsepower is different according to the mechanical type)
Summary of the mechanical operation procedure
Local operation procedure: (p.2 reference)
1. When the power switch is on, the motor turns the clutch wheel at the same time. The binding material is placed on the platform and is blocked by the product (so that its position is not moved and pressed by hand).
2. When pedal is applied, clutch work drives the driving shaft to work (the pedal will release immediately).
3. The pinion drives the big gear so that the shaft connecting the big gear turns.
4. The big gear turns the pinion engaged with the big gear, while the chain rotates and the wire (cable) rod is turned.
5. At the same time, the various cam matrices under the fixed table also rotate.
6. The first and second rotation of the conductor (cable) bar makes the binding material be wrapped one or two turns. When the conductor (cable) rod is turned to a small extent before the end point, the crimping tool (K-33) is backward, and the wire (cable) is hung in the twist buckle (c-46). The second is the crimp (cable) tool (k-
39) start pressing the line (cable) on the twist buckle (refer to figure 20 of P17).
7. When fully pressed, the beak of the nodule protrudes and hangs on the line (cable) at the front of the beak.
8. For this reason, the beak turns to the left, opens the lower mouth during rotation, and when the rotation ends, the lower mouth closes to the upper mouth and bites two lines (cables).
9. The beak of the bird that bites the line (cable) starts to retreat, and the same extraction device (K-79) drops to ensure that the nodule is blocked, so that the nodule does not shrink in.
10. When the beak starts to retreat: extend the knife and cut it off_ A new line (cable) is pulled out by the buckle at the beginning of the tool holder at the same time.
11. The beak is fully retracted, while the nodule is firm, the lower mouth opens to leave the nodal circle.
12. After nodule knot, clutch will leave automatically and make preparations for next operation.
The above is a process of operation cycle. When using this machine, a cycle can be operated and completed within 1.5 seconds. So to understand these actions, please take the electric switch as "off", step on the foot, and turn the clutch (E-1) by hand to observe its action to understand.
technical parameter
Technical Data:
| Model |
JJK-35 |
JJK-60 |
JJK75 |
JJK100 |
JJK120 |
| Bundling Scope |
Max35
Mini5 |
Max60
Mini10 |
Max75
Mini15
|
Max100
Mini20 |
Max115
Mini30 |
| Deep Use Desktop |
20cm |
26cm |
26cm |
36cm |
36cm |
| Length |
72cm |
82cm |
82cm |
124cm |
130cm |
| Width |
65cm |
105cm |
125cm |
145cm |
145cm |
| Height |
122cm |
132cm |
160cm |
195cm |
195cm |
| Total Power |
0.37kw |
0.37kw |
0.37kw |
0.37kw |
0.37kw |
| Weight |
120kg |
181kg |
191kg |
210kg |
260kg |
Audited Supplier 
){kind=link}